Function, rubber sheet according to a use Vibration Isolation Rubber Sheet

Vibration Isolation Rubber Sheet 画像1

Features

  • ・Complies with JIS standard for vibration isolation rubber.
Function ・ Vibration Isolation Rubber

*Hardness measurement is revised to “After 3 seconds” according to JIS K 6253 (2006). However, generally, the conventional "measurement within 1 second" is to be the mainstream for nominal hardness, so this result is measured value and the measurement result after 3 seconds is shown in ().

Properties: Vibration Isolation Rubber Sheet

Item Name Properties
Elastic
Modulus
in
Static
Shear
MPa
{kgf/cm2}
General Properties Oil
Resistance
100°C
×
72h
IRM 903
Volume
Change
Rate
%
Heat-Resistant Aging
100°C×72h
Compression
Set
100°C
×
24h
%
Ozone
Resistance
Ozone
500ppb
(50pphm)
40°C
×
20%
Elongation
Hardness
Type
A
Tensile
Strength
at Break
MPa
{kgf/cm2}
Elongation
at Break
%
25%
Elongation
Stress
Change
Rate
%
Change
Rate of
Elongation
at
Break
%
Vibration Isolation
Rubber Sheet
(C-06) 0.52 {5.3} 43(42) 9.7
{99}
530 +109 +46 -24 22 72h
No change
  (C-08) 0.78 {8.0} 53(53) 17.1
{174}
510 +74 +72 -23 13 72h
No change
  (C-10) 0.97 {9.9} 61(59) 9.8
{100}
370 +98 +77 -40 35 72h
No change

JIS K 6250

Please check here to find out the environmental compliance of this product.

 

●These descriptions can be altered for a reason of improvement without any notification.
●These descriptions shall be as of November 1, 2021.

Inquiry for Details of Our Products

Contact Us / Brochures

Product specifications, dimensions, and designs are subject to change without notice due to improvements, etc.


Main Products

Search by Product Category
Search by industry